10-1
10. NOTIFICATIONS
10.1
Notifications Overview
The system releases alarms and messages, collectively referred to as notifications,
when the specified conditions are met.
When the conditions for a notification are met, the system releases an audible alert
and the screen shows the relevant message at the top of the screen. You can silence
the audible alert by tapping the message, however the messages remains on the
screen until the corresponding alarm/notification is deactivated, or the cause for the
notification is gone.
Note 1:
The audible alert for Level 1 engine alarms cannot be silenced.
Note 2:
Engine alarm settings are fixed and cannot be adjusted.
You can set up alarms and their conditions in the [Notifications] menu.
To access the [Notifications] menu
, open the [Home] screen, then tap [Settings] =>
[Notifications].
The menu is separated into the following tabs:
• [General]: Set up the audible alert (buzzer).
• [Fish and Bottom]: Set up Fish Finder-related alerts. See section 7.19.
• [Navigation]: Set up navigational alerts.
• [Tanks]: Set up tank-related alerts.
• [Wind]: Set up wind-related alerts.
• [AIS]: Set up CPA/TCPA alerts. See section 8.9.
10.2
Notification Buzzer Setup
1. Open the [Notifications] menu then select [General].
2. At the [Buzzer Sound] toggle box, select [OFF] or [ON] as appropriate.
3. At [INTERVAL], tap the appropriate interval for the buzzer to sound. [Short] gives
several short beeps, [Long] gives longer beeps, [Continuous] gives a non-stop
beep.
4. Close the menu.
10.3
Navigation Notifications
10.3.1
Grounding notification
You can use the grounding notification to alert you when the seabed is within a spec-
ified depth, which helps to avoid you running aground.
1. Open the [Notifications] menu then select [Navigation].
