Fujitsu Primergy RX300 S4, User Manual

Page: 210 / 267

210
Chapter 8 Operation and Maintenance
8.1 Daily Maintenance
This section explains how to check the status of the operating server, as well as how
to perform daily maintenance.
Information for PRIMERGY
For the latest information on PRIMERGY, update modules, drivers and the software, refer to the Fujitsu
PRIMERGY website.
http://www.fujitsu.com/global/services/computing/server/ia/driver/
Regarding BIOS and firmware, contact to Fujitsu Support Office. Refer to the following website.
http://www.fujitsu.com/global/contact/computing/PRMRGY_index.html
8.1.1 Checking the Server Condition
Use the status LED or server monitoring tool to check the server status.
Checking each LED
This server is equipped with LEDs that display various hardware conditions.
Check the server status via each LED after starting the server. For positions and functions of each status
LED, refer to "1.3 Component Names and Functions" ( p.23).
Server monitoring tool (ServerView)
ServerView is software to monitor that the server hardware is in a normal state to protect important
server resources. When using ServerView, the server hardware is monitored all the time. If an error that
could cause trouble is detected, the administrator is notified in real-time for early detection. This allows
the server administrator to remove a system error early and avoid trouble.
For an overview and installation of ServerView and other high reliability tools, refer to "1.2.2 High
Reliability Tools" ( p.19) and "Chapter 5 High Reliability Tools" ( p.125).
8.1.2 Cleaning
Clean the server and optional devices periodically to prevent failures.
• Before cleaning, turn off the server and unplug the power cables from the
outlets. Also power off peripherals and disconnect them from the server.
Failure to do so may cause electric shock ( "1.4.3 Turning Off the Server"
(p.32)).
• Do not use any cleaning sprays (including flammable types). It may cause a
device failure or a fire.