Fujitsu Primergy RX300 S4, User Manual

Page: 241 / 267

241
PRIMERGY RX300 S4 User's Guide
8.7 Reinstalling the OS
This section explains the procedure for reinstalling the OS.
8.7.1 Checking before OS Reinstallation
Optional devices
For notes on installing the OS again with optional devices installed or connected, refer to "2.1.1
Installing Options" ( p.40).
Deletion of data from the disc
Reinstalling a disk will delete all the contents of that disk. Please be careful. Save the necessary data and
system configuration in a different location. Some drivers and software are not installed together with
the OS. Install them after OS installation.
Other notes
Other notes are the same as those that apply for first time installation. Please check in advance.
8.7.2 Reinstallation Using ServerStart Floppy Disk
When the previous installation was performed in guide or preconfiguration mode, the ServerStart floppy
disk used in that installation can be used again. When the reinstallation is performed with the same
configuration as that for the previous installation, you do not have to edit the configuration file on the
ServerStart floppy disk. You do not have to configure setting on wizards. After ServerStart starts up,
click [Start (OS) Installation] to perform installation.