Fujitsu Primergy RX300 S4 User Manual Download Page 50

Page: 50 / 267

Chapter 3 OS Installation

3.1 Quick Installation Mode

In this quick installation mode, the OS is installed after configuring minimum required

settings. To install the OS quickly and easily, use the quick installation mode.

Confirm that the USB floppy disk drive is connected before turning on the server power.

When installing Windows Server 2008 in Quick installation mode, full installation is performed.

When installing Windows Server 2008 (64-bit), and when saving the configuration file to a floppy disk,

the boot priority must be changed using the BIOS Setup Utility before ServerStart startup. For the

procedure for changing the boot priority, refer to "

When installing Windows Server 2008 (64-bit)

using ServerStart" (

p.42)

Turn on the server and insert PRIMERGY Startup Disc immediately.

ServerStart starts up. The select-media window for the configuration file appears.

Summary of Contents for Primergy RX300 S4












































































































































































































































































Search results

Summary of Contents for Primergy RX300 S4

Reviews:

Related manuals for Primergy RX300 S4

Brands by name

Popular brands

Fujitsu Primergy RX300 S4, User Manual

Search results

Summary of Contents for Primergy RX300 S4

Reviews:

Related manuals for Primergy RX300 S4

Brands by name

Popular brands