Fujitsu Primergy RX300 S4 User Manual Download Page 56

Page: 56 / 267

Chapter 3 OS Installation

Restart the system.

For Windows Server 2008

The system automatically restarts when a message notifies completion of installation.

After restarting, enter the set password to login.

For Windows Server 2003

Press the [Enter] key when a message notifies completion of installation.

Click [Start] – [Shutdown] to restart the system.

After restarting, enter the set password to login.

Perform the settings for the RAID management tool (ServerView RAID).

For the setting procedures, refer to the manuals in Array Controller Document & Tool CD.

• Settings of an array administrator account

The Windows user account is required when using ServerView RAID. Create a group named

"raid-adm", and an account with any name for an array administrator within the group "raid-

adm".

• Setting the HDD check scheduler

When using the SAS RAID Ctrl (MegaRAID SAS), change the settings for the HDD check

scheduler according to the operation that is required. It is set to 12:00 everyday as default.

• Configuration of Battery Recalibration Scheduler

When using a SAS RAID Ctrl (MegaRAID SAS) together with a battery backup unit, change

the settings of Battery Recalibration Scheduler according to the operation that is required. The

default setting is 11:00 on the first of every month.

Perform settings for ServerView.

Refer to "2.4 Checking after Installation" in "ServerView User's Guide" to perform the necessary

settings.

The server setup and OS installation have been completed.

Refer to "Chapter 4 Operations after OS Installation" (

p.73) and perform necessary procedures before

starting server operations.

Summary of Contents for Primergy RX300 S4












































































































































































































































































Search results

Summary of Contents for Primergy RX300 S4

Reviews:

Related manuals for Primergy RX300 S4

Brands by name

Popular brands

Fujitsu Primergy RX300 S4, User Manual

Search results

Summary of Contents for Primergy RX300 S4

Reviews:

Related manuals for Primergy RX300 S4

Brands by name

Popular brands