Fujitsu Primergy RX300 S4, User Manual

Page: 202 / 267

202
Chapter 7 Configuring Hardware and Utilities
7.2.13 Server Menu
The [Server] menu sets the server options.
table: Items on the Server Menu
Item Setting Description
O/S Boot Timeout • Disabled (Initial value)
• Enabled Sets whether to enable or disable the "OS Boot
Monitoring" function when ServerView is installed
in the OS.
When this function is enabled, the system
automatically restarts if the startup of the OS is
halted for some reason.
Note:
The "OS Boot Monitoring" function can also
be enabled or disabled from ServerView.
If ServerView is not installed on the OS, be
sure to set this item to "Disabled".
When this function is enabled, the server
may not operate as intended. For example,
the power may automatically turn off, or the
server may restart.
If ServerView is installed in the OS, be sure
to disable the "OS Boot Monitoring" function
when starting up the system by inserting the
PRIMERGY Startup Disc or DOS floppy
diskette.
If the system is started with this function
enabled, the server may automatically turn
off or restart improperly.
If the server is operated with the "OS Boot
Monitoring" function enabled, enable this
function again before resuming operation.
When setting this function, see the
"ServerView User's Guide" to fully learn
about its specifications, in order to use it
properly with the correct settings.
PhoenixBIOS Setup Utility
Item Specific Help
Select Item
Select Menu
Change Values
Select > Sub-Menu -/+
Enter
Advanced Security Server Exit Main
O/S Boot Timeout:
Action:
Timeout Value:
ASR&R Boot Delay:
Power Cycle Delay:
Boot Retry Counter:
Temperature Monitoring:
Memory Scrubbing:
CPU Status
Memory Status
PCI Status
Console Redirection >
>
>
>
[Disabled]
[Reset]
[0]
[2]
[7]
[3]
[Disabled]
[Enabled]