Fujitsu Primergy RX300 S4, User Manual

Page: 215 / 267

215
PRIMERGY RX300 S4 User's Guide
• There may be an error in the system area of the memory. Contact an office listed in the "Contact
Information" of the "Start Guide".
Typing the keyboard does not display any characters, or the mouse cursor
does not move.
Check to see whether the keyboard and mouse are connected properly. If they are not connected or you
replace them yourself, turn the server off and then connect the cables to the server. For the connection
location, refer to "Start Guide".
The screen shakes.
If a device that produces a strong magnetic field such as a television or speaker is near the display, place
them further away from the display.
The display may also shake if a nearby cell-phone receives a call. Do not use a cell-phone near the
display.
The screen display is distorted.
The screen display may be distorted during 3D program execution or the 3D program may terminate
abnormally. If this occurs, set Color quality in screen properties to anything other than True Color (32
bits).
CD/DVD drive unit
Cannot read data.
• Check to see whether the CD/DVD is inserted properly.
If it is not inserted, correctly insert the CD/DVD so that the label is facing up.
• Check to see whether the CD/DVD is not dirty.
If it is dirty, wipe it with a soft, dry cloth.
• Check to see whether the CD/DVD is not scratched or bent.
If scratched or damaged, replace the CD/DVD.
SCSI device (internal/external)
The unit does not operate properly.
• Check to see whether the internal cable is connected properly.
If it is not connected, correctly connect the cable.
• Check to see whether the SCSI IDs and terminator are set properly.
If they are not set, correctly set the SCSI ID and terminator.