manualshive.com logo in svg

Fujitsu ABHG18KRTA, Service Manual

Share
Download
Fujitsu ABHG18KRTA Service Manual Download Page 427

¢

UTY-RLRG

Setting procedure by using wired remote controller

The function number and the associated setting value are displayed on the LCD of the remote con-
troller. Follow the instructions written in the local setup procedure supplied with the remote controller,
and select appropriate setting according to the installation environment.
Before connecting the power supply of the indoor unit, reconfirm following items:

• Piping air tightness test and vacuuming have been performed firmly.
• There is no wiring mistake.

1.

Connect the power supply.

2.

To activate the address setting mode, hold down the three buttons of “MENU”, “<“, and “EN-
TER” at the same time for 2 seconds or longer. Menu 2 setting screen is displayed.

3.

Select the “13” in Menu 2 settings. Then press the “ENTER” button.

4.

Pressing the "+" or "-" button, select a remote controller address (select the indoor unit you
want to operate). Then press the "ENTER" button.

Remote controller address

Example: When remote controller address “01” is selected.

1-3. Indoor unit (setting by wired remote controller)

- (05-23) -

1. Function settings (for indoor unit)

FIELD

WORKING

FIELD

WORKING

Summary of Contents for ABHG18KRTA
























































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands