Fujitsu ABHG18KRTA, Service Manual

Page: 389 / 471

7. Various control
7-1. Auto restart
When the power was interrupted by a power failure etc. during operation, the operation contents at
that time are memorized and when the power is recovered, operation is automatically started with
the memorized operation contents.
Operation contents
memorized when the power is
interrupted
Wall mounted (For KGTE, 18–
24KMTB, KMTE, KMCE, KETA, and
KETE),
Floor
Compact cassette,
Mini duct, Slim duct,
Medium static pressure duct,
Wall mounted (For KGTB, 07–
14KMTB, and KMCC),
Ceiling
Operation mode ○ ○
Setting temperature ○ ○
Fan mode setting ○ ○
Timer mode and set time
(set by wireless remote
controller)
○ ○
Airflow direction setting ○ ○
Swing ○ ○
ECONOMY operation ○ ○
10 °C HEAT operation ○ ○
Outdoor low noise operation ○ ○
Remote control setting ○ —
WLAN indicator lamp setting ○ —
7-2. MANUAL AUTO operation
When the wireless remote controller is lost or battery power dissipated, this function will work without
the remote controller.
When MANUAL AUTO button is pressed more than 3 seconds and less than 10 seconds, MANUAL
AUTO operation starts as shown in the table below. To stop operation, press the MANUAL AUTO
button for 3 seconds.
Wall mounted, Floor
Compact cassette,
Mini duct, Slim duct,
Medium static pressure duct,
Ceiling
Operation mode Auto changeover
Fan mode AUTO
Timer mode Continuous (no timer setting available)
Setting temperature 24°C
Horizontal louver setting Standard According to memory position
Vertical louver setting
According to memory position
SWING Off
ECONOMY Off
Human sensor Off
7-1. Auto restart
- (04-69) -
7. Various control
CONTROL AND FUNCTIONS CONTROL AND FUNCTIONS