manualshive.com logo in svg

Fujitsu ABHG18KRTA, Service Manual

Share
Download
Fujitsu ABHG18KRTA Service Manual Download Page 420

3.

Select the function number by pressing the   or the   buttons. Each time the 10°C HEAT
button is pressed, it switches between the right digit and the left digit.

Change digit

Change digit

4.

Proceed to the setting number by pressing the ECONOMY button. (To return to the function
number selection, press the ECONOMY button again.)

5.

Select the function number by pressing the   or the   button. Each time the 10°C HEAT but-
ton is pressed, it switches between the right digit and the left digit.

Change digit

6.

Press the MODE button once to transmit the function mode information.

1-2. Indoor unit (setting by wireless remote controller)

- (05-16) -

1. Function settings (for indoor unit)

FIELD

WORKING

FIELD

WORKING

Summary of Contents for ABHG18KRTA
























































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands