FujiFilm FRENIC5000G11S Series, Technical Information

Page: 176 / 236

Chapter 5
1. Options
5-10
Type Card-type OPC-G11S-RY *)
Unit-type – –
Function
Input
Output
Connection diagram
Remarks
Name Relay output card
Power
source
Specifica-
tions
• Includes four relay output circuits.
• Converts transistor output signals from inverter
control output terminals Y1 to Y4 to relay
(1SPDT) output signals.
None
Four-channel contact (12 terminals from Y1A to
Y4C) 250Vac, 0.3A, cos ø = 0.3
The power source to drive the relay card is
supplied from inverter.
In addition to the relay output function, PG vector
control can be performed with the feedback signal
from pulse generator.
Connect the pulse generator A-phase, B-phase
output signal.
None
• Internal power source:
+15Vdc
±
10%/120mA, +12Vdc
±
10%/120mA (Change-
able on PC board) *1)
• External power source:
+12Vdc (-10%) to +15Vdc (+10%)/300mA or less *2)
*1) Use external power source when more than one
relay output cards are used and the total input
current exceeds 120mA.
*2) Take note of the power source matches the
specifications of the applied pulse generator.
Refer to the connection diagram of PG feedback
card.
*) When the relay output card has to be used
together with the PG feedback card, the card will
be made-to-order. Contact Fuji.
+13Vdc
RY
Y1A
Y1B
Y1C
5G
+13Vdc
RY
Y2A
Y2B
Y2C
5G
+13Vdc
RY
Y3A
Y3B
Y3C
5G
+13Vdc
RY
Y4A
Y4B
Y4C
5G
Connector
OPC-G11S-RY
Chapter5-1(P1˜13).p65
07.8.9, 12:40 Page 10
Adobe PageMaker 6.5J/PPC