FujiFilm FRENIC5000G11S Series, Technical Information

Page: 114 / 236

2-66
Chapter 2
4. Standard RS-485 Interface
NOTE:
*1) 999 is treated as 03E7H (99.9)
Code Name Data format Code Name Data format
o01 Speed command system / automatic speed control system [18]
o02 Time constant of PG vector and speed command filter [7]
o03 Number of feedback PG pulses [1]
o04 Constant P of feedback speed controller [5]
o05 Constant I of feedback speed controller [7]
o06 Time constant of feedback speed detection filter [7]
o07 Feedback pulse correction coefficient 1 [1]
o08 Feedback pulse correction coefficient 2 [1]
o09 Base side number of encoder pulses [1]
o10 Time constant of pulse train input filter [7]
o11 Command pulse compensation coefficient 1 [1]
o12 Command pulse compensation coefficient 2 [1]
o13 Main speed regulator gain [3]
o14 APR P gain [5]
o15 Z phase matching gain [3]
o16 Offset angle [1]
o17 Detecting angle width for completion of synchronizing [1]
o18 Too mach deviation [1]
o19 Di function selection [1]
o20 Di input mode selection [1]
o21 Do function selection [1]
o22 Ai function selection [18]
o23 Ao function selection [18]
o24 Ao1 voltage adjust [3]
o25 Ao2 voltage adjust [3]
o26 Dedicated function for manufacturer –
o27 Mode selection on error [1]
o28 Timer time setting [3]
o29 Transmission format selection [1]
S01 Setting frequency (p.u.) [2]
S05 Setting frequency [5]
S06 Operation command [14]
S07 Universal Do [15]
S08 Acceleration time [3]
S09 Deceleration time [3]
S10 Torque limit level 1 [5] *1
S11 Torque limit level 1 [5] *1
S12 Universal Ao [2]
M01 Setting frequency (Final data) [2]
M05 Setting frequency (Final data) [5]
M06 Output frequency 1 [2]
M07 Torque calculation value [6]
M08 Torque current [6]
M09 Output frequency 1 [19]
M10 Input power [5]
M11 Output current [5]
M12 Output voltage [3]
M13 Operation command (Final data) [14]
M14 Operating state [16]
M15 Y1-Y5 output terminal data [15]
M16 Fault memory 0 [10]
M17 Fault memory (1st prior) [10]
M18 Fault memory (2nd prior) [10]
M19 Fault memory (3rd prior) [10]
M20 Operating time [1]
M21 DC link circuit voltage [1]
M23 Type code [17]
M24 Capacity code [11]
M25 ROM version [1]
M26 Transmission error processing code [10]
M27 Setting frequency at alarming (Final data) [2]
M31 Setting frequency at alarming (Final data) [5]
M32 Output frequency at alarming [2]
M33 Torque calculation value at alarming [6]
M34 Torque current at alarming [6]
M35 Output frequency 1 at alarming [19]
M36 Input power at alarming [5]
M37 Output current at alarming [5]
M38 Output voltage at alarming [3]
M39 Operation command at alarming [14]
M40 Operating state at alarming [16]
M41 Y1-Y5 output terminal data at alarming [15]
M42 Operating time at alarming [1]
M43 DC link circuit voltage at alarming [1]
M44 Inverter internal air temp. at alarming [1]
M45 Cooling fin temp. at alarming [1]
M46 Life of main circuit capacitor [3]
M47 Life of printed circuit board capacitor [1]
M48 Life of cooling fan [1]
Chapter02J(P44˜74).p65
07.8.9, 12:26 Page 66
Adobe PageMaker 6.5J/PPC