FujiFilm DR-ID 1300, Service Manual

Page: 333 / 628

MU2-68
MU2-68
DR-ID 1300 / DR-ID 1300PU Service Manual
018-234-04E
1.13 BACKUP

Function
Copies the configuration information and the error log in the HDD to a desired location
on the CL (a recording medium or a folder).
You can back up the following data:
No. Selection item Data to be backed up
1 CONFIGURATION
Configuration file
Folder name: CONFIG
2 LOG ALL
Logs of Nos. 1 “CONFIGURATION” and 2.1 to 2.9 below are
backed up together.
Collect the following logs together with the mentioned logs.
NETWORK: Communication log of TCP
STATISTIC: BATTERY.CFG (battery information) and
HISTORY.CFG (history information)
2.1
ERROR LOG: Error log
File name: ERROR.cab
2.2
IO TRACE LOG: Not used in the machine.
Folder name: IOT
2.3
ISC TRACE LOG: Communication log between packages
(subsystems). For design verification.
File name: ISC.cab
2.4
SOFT LOG: Communication log between packages
(subsystems). For design verification.
File name: Trace.cab, Trace2.cab, Trace3.cab, Trace4.cab,
Trace5.cab
The X-ray automatic detection log and the compensation data
share log are included here.
2.5
CSL LOG: Communication log between the CL and the MC
File name: CONSOL.cab
2.6
RADCON LOG: Serial communication log between the MC and
the X-CON
File name: RADCON.cab
2.7
CALIB LOG: Calibration history log
File name: CALIB.cab
2.8
HISTORY LOG: Use status statistic file of the FPD
File name: HISTORY.cab
2.9 SE REGISTRATION
INFORMATION
Output the registration information of panels to the log.
3 CORRECT ALL DATA Collectively acquire the data of the registered panels (maximum
of 100 pieces).
4 CORRECT PANEL
DATA
Acquire the data of an individual panel by specifying the panel
number.
u
NOTE
u
Refer to the following for further details on the CALIBRATION LOG files, GLG log files
and SERegistInfo.txt.
{MT:5._BACKUP FILE}