FujiFilm DR-ID 1300, Service Manual

Page: 316 / 628

MU2-51
MU2-51
DR-ID 1300 / DR-ID 1300PU Service Manual
018-234-03E
1.8 INSTALL

Function
Installs the RU software when a new RU or an additional RU is to be installed.
u
INSTRUCTION
u
- The RU PC-TOOL needs to be installed beforehand.
{IN2:10.2_Installing the RU PC-TOOL}
- The RU name and the IP address of the RU need to be installed beforehand.
{MU2:1.1_NEW}

Procedures
{IN2:10.3_Installing the RU Software}
u
NOTE
u
- Installing the NIC first and then changing the setting of the CSL-PC + performing the
BAT are required before performing [INSTALL].
{IN2:10.1_Installing and Setting the NIC Board to the DX Console}
- When the MC application is installed, the MC Manager restarts automatically after
the completion of the installation.
1.9 VERSION UP

Function
Version-updates the RU software.

Procedures
(1) Restart the CL after clicking the CL software system exit button, and
sequentially click the upper left and upper right of the screen within
three seconds after the initial screen appears.
MC Manager only starts.
u
NOTE
u
If step 1 could not be performed within three seconds, re-execute step 1 when
the CL software has started up.
(2) Check that the MC Manager icon has appeared on the task tray.
(3) Insert the application disk into the drive.
(4) Select “.\install\remote\MCSetupWizard.bat” from “FILE EXECUTION”
area, and click [EXECUTE].