FujiFilm DR-ID 1300, Service Manual

Page: 613 / 628

AppxIN7-1
AppxIN7-1
DR-ID 1300 / DR-ID 1300PU Service Manual
018-234-03E
Appendix 7. Installing the RU PC-TOOL
(MC V3.x or Earlier)
n
Installing the RU PC-TOOL
(1) Turn ON the power of the machine.
u
INSTRUCTION
u
When the CL power is turned ON for the first time, do so after one of two SE’s, if
connected, is removed.
This is because the default IP address (IP address when shipped out from the
factory) which is registered in the SE is the same (192.168.0.30) for all SE’s.
If two SE’s are connected therefore, the SE cannot be identified due to the
duplicate address, resulting in an error.
REFERENCES
If the Wake on LAN setting is not completed, turn ON the power in the following
order:
(1) Turn ON the MP power.
(2) Turn ON the CL power.
(2) Exit from the CL software, and display the normal Windows screen.
REFERENCE
When you click the Shut Down button of the CL software, the pop-up menu
appears for prompting to exit from the system. When you click [OK] in the pop-up
menu while pressing the shift key on the keyboard, the CL software terminates
and the Windows screen opens.
Keep pressing the shift key until the message of termination processing in
progress disappears.
#1 Click: [Shut Down]
#2 Click: [OK] (click while pressing the shift key on the keyboard)
1200_700143E.ai
#1
#2
(3) Insert the install disk into the DVD drive of the CL.
Upon inserting the install disk into the DVD drive, the “Set Up PC-TOOL” window
automatically starts.