FujiFilm DR-ID 1300, Service Manual

Page: 446 / 628

IN1-65
IN1-65
DR-ID 1300 / DR-ID 1300PU Service Manual
018-234-05E
(3) Confirm that the serial ID is displayed, then click [Next].
1300_700067E.ai
(4) Left-click the MC Manager from the task tray and execute “EXIT”.
Check that the MC Manager icon has disappeared from the task tray, and then
start the MC Manager from “Start menu”.
NOTE
With the DR-ID 1300, do not perform “Changing the SE Country Code”.
10.10 Setting the IP Address of the SE
Select the target SE, and set the IP address.
u
INSTRUCTION
u
Be sure that the number of the connected SE is one when setting the IP address of
SE. Because all the default IP addresses (when shipped out from the factory) are
the same each other, connecting multiple SEs in parallel causes “10214 IP address
multiple connection error”, resulting in system down.
REFERENCE
The default IP address is as the following.
Item IP address
1305SE (TOP) 192.168.0.90
1305SE (CENTER) 192.168.0.91
1305SE (BOTTOM) 192.168.0.92
(1) Select the target SE from the drop-down list box, and click [GET].
1200_700501E.ai
The IP Address of the SE (wired/wireless) appears.