FujiFilm DR-ID 1300, Service Manual

Page: 184 / 628

MU1-19
MU1-19
DR-ID 1300 / DR-ID 1300PU Service Manual
018-234-06E
REFERENCE
- In comparison with High-Speed Mode, the time required for image acquisition in the
Standard Mode is approximately 370 ms longer.
- Even if the noise is generated via image evaluations whereas physical phantoms
such as mesh, etc. were used, this noise is not generated in human body exposures.

IMAGE LOG SAVE
Selects whether or not the recorded image log is to be stored in the HDD.
Always use the setting of OFF [default] in the machine.
<Options>
- OFF [default] : Not stored
- ON: Stored
u
NOTE
u
When set to “ON”, the PC capacity is compressed and the throughput is degraded.

IMAGE LOG SAVE TO FTP
Selects whether or not the recorded image log is to be stored in the FTP.
Always use the setting of OFF [default] in the machine.
<Options>
- OFF [default] : Not stored
- ON: Stored
u
NOTE
u
When set to “ON”, the PC capacity is compressed and the throughput is degraded.

OFFSET2 (blemish/unevenness correction setting)
Select whether or not the blemish/unevenness correction is to be performed.
<Options>
- OFF: Not performed
- ON [default]: Performed

T2 TIMER(sec)
Set the start time (sec) of the calibration executed in the background. When the
exposure has been completed, the calibration begins after the time elapsed that was
set.
- Character string: [default: 120]

AUTO DEFECT CALIBRATION
Set whether the automatic defect calibration is to be executed or not.
<Options>
- OFF: Not executed
- ON [default]: Executed

AUTO DEFECT CALIBRATION START HOURS
When “ON” is selected in “AUTO DEFECT CALIBRATION”, input the automatic
execution time hourly.
- 2-character string or less [default: 4]

AUTO DEFECT CALIBRATION START MINUTES
When “ON” is selected in “AUTO DEFECT CALIBRATION”, input the automatic
execution time minutely.
- 2-character string or less [default: 0]

OFFSET JUDGING
Select whether or not the blemish/unevenness correction is to be performed.
<Options>
- OFF: Not performed
- ON [default]: Performed