FujiFilm DR-ID 1300, Service Manual

Page: 385 / 628

IN1-4
IN1-4
DR-ID 1300 / DR-ID 1300PU Service Manual
018-234-04E
3. Precautions in Installation
WARNING/CAUTION
Observe the warning and precautions mentioned in “Safety Precaution”.
CAUTION
When connecting or disconnecting the cable connector, wear an antistatic wrist
band to ground the human body. Otherwise, static electricity charged in the
human body might damage electronic components.
INSTRUCTION
It is recommended that you should not install machine cables (such as the power
cables and communication cables) near such instruments that generate magnetic field
noise (such as a motor, transducer and switching power source) and other cables to
assure appropriate image quality.
INSTRUCTION
Do not make a radius of curvature of the SE cable smaller than 50 mm. If the radius of
curvature is smaller than 50 mm, disconnection might occur in the cable, resulting in
abnormality in image.
NOTE
- When installing the SE into the exposure stand, SE LED must be able to be checked
through the opening of the exposure stand.
- If the exposure stand is equipped with the external cover, the panel effective area
and overlapping part on the top place of the exposure stand must be able to be
checked.
- If the exposure stand is equipped without the external cover, the display of the panel
effective area and overlapping part must be able to be checked.