FujiFilm DR-ID 1300, Service Manual

Page: 68 / 628

MD-3
MD-3
DR-ID 1300 / DR-ID 1300PU Service Manual
018-234-03E
1.3 General Configuration of the DR-ID 1300PU
and Names
1.3.1 External View and Functions
1300_100002.ai
(A)
(B)
No. Name Description
(A) DR-ID 1305SE
(flat panel sensor)
- Serves as the indirect FPD (X-ray flat panel detector) by
means of gadolinium oxide sulfur, converts the X-ray energy
transmitting through a subject into a digital image signal, and
transfers it to the MC.
The control signal and image signals are together
transmitted/received via the MC also including the Ethernet
function.
- Incorporates the status lamp (LED) indicating the SE status.
(B) DR-ID 1300MP
(power supply unit)
- Operates by an instruction from the MC, and has a MC
protocol conversion function.
- Transmits/receives the X-ray shot signal and exposure
conditions/exposure performance data, and transmits the
information to the MC.
- Supplies power (24 V) to the SE.
- The power cable is shipped together with the machine from
the factory to destinations inside Japan. The cable needs to
be locally prepared in other countries.
REFERENCE
Indications of the status lamps (LED’s) are as follows:
READY
Status lamp A
Status lamp B
POWER
ERROR
READY
READY
READY
The order of the LEDs
is the same as that of
the panels.
1300_100003E.ai
- Status lamp A
LED Lighting state Description
READY LED
(Green)
Lit Exposure possible
Flashing at 1.0-sec intervals During exposure sequence
Unlit Standby
POWER LED
(Blue)
Lit Power ON
Flashing -
Unlit Power OFF
ERROR LED
(Orange)
Lit Communication error
Flashing at 1.0-sec intervals Hardware error
Unlit Normal
- Status lamp B (for each panel)
LED Lighting state Description
READY LED
(Green)
Lit Exposure possible
Flashing at 1.0-sec intervals During exposure sequence
Unlit Standby