FujiFilm DR-ID 1300, Service Manual

Page: 208 / 628

MU1-43
MU1-43
DR-ID 1300 / DR-ID 1300PU Service Manual
018-234-06E
1.4.6 Line Defects Data Registration
By using this function, the line defects which are not being detected by the automatic
defect calibration can be registered to the calibration subjects. In addition, if there are
defects which cannot be dealt with via calibration, a “12231 Defect correction data
generation anomaly” error occurs when the FPD is started up.

Preparation
(1) Back up the correction data for the target panel with the DR
maintenance software.
{MU1:1.10.1_SE Correct Data Backup/Restore}
(2) Click “CONFIG SETTING” - “MC Setting” in the DR Maintenance
Software to return the MC rotation setting to the default value.
I. Click “CONFIG SETTING” - “MC Setting” in the DR Maintenance Software.
II. Set “TABLE DIRECTION HEAD” to the default value (RIGHT).
III. Set “UPRIGHT 180 REVERSE” to the default value (none).
IV. Click [SET] at the bottom of the window.
1200_400062E-1.ai
I.
II.
III.
(3) Download and install the free software ImageJ.
Search for “ImageJ” with a search engine, or download it at “https://imagej.nih. gov/
ij/”.

Identify the line defect locations
(1) On the CSL, expose under the following conditions, and identify the
images in which the line defects are visible.
Exposure menu: Sensitivity, Rotation: OFF, Image format: none
(2) Acquire the image files.

Image data
They are in the following folder.
C:\Program Files\Fujifilm\IIP\Data\Image
The image data’s file creation dates and times, will be the exposure dates and
times. Search for the target files based on the file creation dates and times.

File names
They are as per the following
Routine numerals.std (Raw data)
REFERENCE
The images can also be collected by also implementing the DX image pickup
tools which are distributed by the ECN.
If the DX image pickup tools are usable, then use the DX image pickup tools.