FujiFilm DR-ID 1300, Service Manual

Page: 177 / 628

MU1-12
MU1-12
DR-ID 1300 / DR-ID 1300PU Service Manual
018-234-04E

Setting Items

MC ID CODE
Check just the SEs shared via multiple MCs when connected to FUJIFILM APs.
The “MC_ID_MODE” checks that other MCs are not redundant, and makes changes if
they are redundant.

EDIT RU NAME
Input the RU name.
u
NOTE
u
The RU maximum input character count is 15 one-byte characters.

CSL MAC ADDRESS (xx:xx:xx:xx:xx:xx)
Inputs the MAC address [Default: 00:00:00:00:00:00].
u
NOTE
u
If the PC for MC is available, input this MAC address after starting the DX Console
with the Wake on LAN when turning ON the MC power.
REFERENCE
<How to display the MAC address>
(1) Press the Windows key and the [R] key concurrently.
→ The “Run...” window opens.
(2) Input “cmd

/k ipconfig

/all”, and click [OK]. (

indicates a space.)
→ The MAC address appears in “Physical Address” of the “Ethernet adapter Local
Area Connection:” block.

CSL IP ADDRESS (xxx.xxx.xxx.xxx)
Inputs the IP address [Default: 127.0.0.7].
u
NOTE
u
If the PC for MC is available, change its IP address.

OPE SETTING (UPRIGHT)
Specifies to which MP the X-ray shot cable corresponding to the operative method
[Stand] of the X-ray equipment is to be connected.
<Options>
- None: Not connected
- MP1 [default]: Connected to MP1
- MP2: Connected to MP2
{

OPE SETTING (UPRIGHT/TABLE/FREE)}

OPE SETTING (TABLE)
Specifies to which MP the X-ray shot cable corresponding to the operative method [Bed]
of the X-ray equipment is to be connected.
<Options>
- None: Not connected
- MP1 [default]: Connected to MP1
- MP2: Connected to MP2
{

OPE SETTING (UPRIGHT/TABLE/FREE)}

OPE SETTING (FREE)
Specifies to which MP the X-ray shot cable corresponding to the operative method
[FREE (general)] of the X-ray equipment is to be connected.
<Options>
- None: Not connected
- MP1 [default]: Connected to MP1
- MP2: Connected to MP2
{

OPE SETTING (UPRIGHT/TABLE/FREE)}

PORT SETTING (UPRIGHT)
Specifies to which terminal block the X-ray shot cable corresponding to the operative
method [Stand] of the X-ray equipment is to be connected.
<Options>
- MPX1 [default]: Connected to MPX1
- MPX2: Connected to MPX2