FujiFilm DR-ID 1300, Service Manual

Page: 515 / 628

IN2-38
IN2-38
DR-ID 1300 / DR-ID 1300PU Service Manual
018-234-04E
8.2 Connecting the Network Cables
(1) Connect the LAN cable between the MP and the DX Console to the DX
Console.
#1 Connect: LAN cable (between the MP and the DX Console)
1200_700104.ai
DX Console
MP
#1#2
n
Network Configuration
NOTE
The IP addresses with red letters in the following figures are the items that are
required to be changed from the default values.
Refer to the following for the changing procedure for the DR-ID 1305SE.
{IN2:10.11_Setting the IP Address of the SE}
l
In case of one DR-ID 1305SE configuration
1300_700059E.ai
Hospital Network
Console Advance
(DR-ID 300CL)
[DR-ID 1200MC]
DR-ID 1300MP
DR-ID 1305SE
192.168.0.20
(Eth1)
192.168.0.10
172.16.1.20
(Eth0)
192.168.0.90 (TOP)
192.168.0.91 (CENTER)
192.168.0.92 (BOTTOM)
LAN cable
DR-ID1300 SE cable
NOTE
In case of one DR-ID 1305SE configuration, connect the SE cable to MPL5 connector
and MPL7 connector of the MPL65A board into the MP.