FujiFilm DR-ID 1300, Service Manual

Page: 528 / 628

IN2-51
IN2-51
DR-ID 1300 / DR-ID 1300PU Service Manual
018-234-04E
n
Preparation (for V11.X or later)
Implement the following procedures when newly installing MC V11 or later, or when
upgrading the versions on computers which have MC V11 or earlier installed on them
to V11.x or later.
(1) Insert the application disk into the CL drive and double-click
“SetupRun.exe” into the drive on the My Computer.
The “Set Up PC-TOOL” window appear.
(2) Select “\versionup\local\V11.0.bat” from “FILE EXECUTION” area, and
click [EXECUTE].
800_700197.ai
Set Up PC-TOOL window
The following window opens.
800_700198.ai
(3) Press the <Y> key on the keyboard.
Upon completion of the configuration setting, the “Version Up Completed” opens.
(4) Press the <Enter> key.
n
Setting up the RU Software Version
(1) Double-click “SetupRun.exe” into the drive on the My Computer.
The “Set Up PC-TOOL” window appear.
(2) Select “.\install\remote\MCSetupWizard.bat” from “FILE EXECUTION”
area, and click [EXECUTE].
(3) Input the target MC IP address and click [Connect].
#1 Input: MC IP address
#2 Click: [Connect]
800_700200.ai
#1
#2
u
NOTE
u
- If the MC could not be connected to due to the mistaken inputting of the IP
address, a connection error occurs. After checking the connection status, re-
execute the version upgrade.
- If the MC application was not factory-installed, and if the model media being
used differs from the model which was installed, then the error will appear.
Confirm the MC application installation status and the media model information,
and re-execute the version upgrade.
￥
u
INSTRUCTION
u
If the RU registration has been already completed, steps 4 and 5 are not
necessary. Proceed to step 6.