FujiFilm DR-ID 1300, Service Manual

Page: 86 / 628

DR-ID 1300 / DR-ID 1300PU Service Manual
MT-9
MT-9
018-234-06E
Error
Code
Error Name Occurrence Condition Probable Cause and Remedy
11112 RMV board communication
error
[During bootup/routine processing]
Although an attempt is made to set the reading mode for the RMV
board mounted on the FPD, an error in communication is detected when
reading back the register value after setting of the reading mode. The
communication is retried, but results in a failure. The FPD is disabled.
[During M-Utility]
- An error is detected by Communication Check of RMV.
- Select a defective matter from the detail error log
indicated in ERRORDB.LOG, and check it.
{MT:1.3.1_11112 Error}
11140 CPU image correction error
[During routine processing]
Processing of the CPU image correction library fails.
11160 Exposure time sequence
timeout
[During routine processing]
Signals necessary for continuing the exposure cannot be received after
starting the exposure, resulting in timeout.
11201 FAN stop error
[During bootup/routine processing]
MP cooling fan stop is detected.
<Reference>
You can know which fan stops on the error log.
- Check the MP cooling fan (P-FAN).
11210 FPD low temperature warning
[During bootup/routine processing]
A low temperature (Approx. 10°C or lower) in the FPD is detected, and
the FPD is disabled.
<Reference>
- You can know the No. of the FPD of interest and the temperature when
the error is detected on the error log.
- This temperature is an estimate since it fluctuates depending on the SE
type and the external temperatures.
- Check the environments at the installation site.
- Check the use conditions.
- Check the FPD.
11211 FPD high temperature warning
[During bootup/routine processing]
The panel gets high temperature (Approx. 40°C or higher) and is disabled.
<Reference>
- You can know the No. of the FPD of interest and the temperature when
the error is detected on the error log.
- This temperature is an estimate since it fluctuates depending on the SE
type and the external temperatures.
- Check the environments at the installation site.
- Check the use conditions.
- Check the MP cooling fan (P-FAN).
- Check the FPD.
11215 Battery high temperature
warning
[During bootup/routine processing]
The battery temperature rises to the warning level.
- Check the ambient temperature.
- Space exposures to lower the temperature in the FPD.