FujiFilm DR-ID 1300, Service Manual

Page: 58 / 628

Product Specifications
-13
Product Specification
-13
DR-ID 1300 / DR-ID 1300PU Service Manual
018-234-04E
7. Other Specifications

SE

X-ray conversion mode
Indirect conversion mode (GOS* scintillator)
* GOS: Terbium-activated gadolinium oxysulfide; one of materials emitting light by
X-ray energy

Number of pixels
2,832 x 8,228 (pixel)

Effective image area
424.8 x 1234.2 (mm)

Pixel resolution
0.15 (mm/pixel)

Concentration resolution
16 bit

Image quality
With quality of radiation of RQA5 and a dose of 258 nC/kg;
Noise (DQE): 23.3 to 31.9% (per cycle/mm)
Sharpness (MTF): 54.0 to 66.0% [Normally sharp](per cycle/mm)
67.5 to 82.5% [Highly sharp](per cycle/mm)

Withstand load (SE)
Point load
(Φ40)
40 kgf

Maximum Attenuation Equivalent
0.1 mmAl (SE front cover)

DR-ID 300CL (computer) minimum specification
See the DR-ID 300CL Service Manual.

Performance

Image display
<Preview display time (sequential display for the first image)>
- Image reading for 49 x 17 inch size : 9 seconds
<Time until the confirmation of the long cassette and still image from the start of
exposing>
- Image reading for 49 x 17 inch size : 20 seconds
- Image reading for 17 x 17 inch size* : 6 seconds
* Using the top panel or bottom panel of the detector

Exposure cycle
<X-ray connection/X-ray automatic detection function (AUTO DETECT)>
- Image reading for 49 x 17 inch size : 26 seconds
- Image reading for 17 x 17 inch size* : 10 seconds
* Using the top panel or bottom panel of the detector
u
NOTE
u
- Time for SW1 to be ready for being accepted after the accumulation is completed
- Time when exposure is performed in the mode1 (accumulation time: 600 msec)
- The user’s operation time is not included.

Noise (MP)
Operation: 55 dB or less
Standby: 50 dB or less (except single noise)
REFERENCE
The values are measured at positions that are 1.2 to 1.5 m above the floor and a 1 m
interval from the device surface.