FujiFilm DR-ID 1300, Service Manual

Page: 537 / 628

IN2-60
IN2-60
DR-ID 1300 / DR-ID 1300PU Service Manual
018-234-04E
10.5.2 Updating MP Application Software Version
NOTE
Follow the procedures below only when the version update of the MP application
software is necessary.
(1) Make sure that the install disk is inserted in the DVD drive of the CL.
(2) Click [INSTALL] command, and then click [Install MP Software >>] and
[MP1 Install >>].
#1 Click: [INSTALL]
#2 Click: [Install MP Software >>]
#3 Click: [MP1 Install >>]
1200_700094E.ai
#2
#3
MP Install>>window
MP1 Install>>window
INSTALL window
#1
(3) Click [MP1 Software VerUp Install] on the MP1 Install >> window.
#1 Click: [MP1 Software VerUp Install]
#1
MP1 Install>>window
1200_700095E.ai
(4) Click [OK] when the confirmation window opens.
(5) Check that the installation is completed, and again start up the MP.
#1 Check: OK
1200_700096E.ai
#1
MP1 Install>>window
(6) Check the MP application software version.
{IN2:10.5.1_Checking the MP Application Software Version}