FujiFilm DR-ID 1300, Service Manual

Page: 218 / 628

MU1-53
MU1-53
DR-ID 1300 / DR-ID 1300PU Service Manual
018-234-06E
1.5 NETWORK SETTING
Used to set and check the IP addresses and to measure wireless communication rate.
u
INSTRUCTION
u
The segment No. of the network address must be set to the same value among the
MC, MP, SE and AP. If different network address values are set, the network among
the machines might get disconnected. Initialization of the machines might be needed
in such a case.
How far in the IP address the network address indicates depends on the setting of the
subnet mask. The default value of the subnet mask of the machine is 255.255.255.0,
and locations assigned by 255 (mask value areas) indicate the network address.
DRID600_G0070.ai
192.168.0.0
Network address
Segment No.
Host address

MC ETH0 and MC ETH1
MC ETH0 indicates the network setting between the MC and CL, and MC ETH1
indicates the network setting between the MC and MP.
The connection diagram of the MP/MC/CL and default IP addresses are shown below.
DRID600_G0142.ai
192.168.0.20 192.168.0.10
ETH1
MP MC/CL
ETH0
172.16.1.20