FujiFilm DR-ID 1300, Service Manual

Page: 219 / 628

MU1-54
MU1-54
DR-ID 1300 / DR-ID 1300PU Service Manual
018-234-06E
1.5.1 Local Network
Input the set value when the IP address of the local network is to be changed. To
make the changed set value effective, the set value needs to be enabled (setting
executed) respectively for the SE, MP and MC.
CAUTION
Enable the set value in the order of the SE, MP, DS, AP and MC to make them
effective. If a wrong order is taken, the setting does not get effective, and might
result in need of initializing the machine.
u
INSTRUCTION
u
If the segment No. of the network address is changed, the network address of the
access point (AP) must be changed to include the same segment No. If the network
address of the access point differs, wireless connection of the SE cannot be made.
1200_400111E.ai
(2)
(3)
(1)
(1) Click [NETWORK SETTING].
The NETWORK SETTING window opens.
(2)
If the Network Address Field and the MC Subnet Mask are to be changed,
change the input values.
In order to activate the changed setting values, the respective SEs, MPs, and
MCs need to be activated (settings implemented).
(3) Implement the network settings pertaining to the respective SEs, MPs,
and MCs.
u
NOTE
u
After setting, implement “■ Restarting the config and checking the setting
effected”.