Foma SO903i, Manual

Page: 370 / 384

12
5
Click [ キャンセル ].
6
Enter a host (APN) and press

.
Input format
AT+CGDCONT=<cid>, “PPP”, “APN”

Enter the registration number 2
or a number between 4 and 10. Enclose the host name you
enter in double quotes.
If the AT command you entered is not displayed
Enter “ATE1

”.
When the host (APN) is set, “OK” appears.
7
Click the [ ファイル ] menu → [ ハイパーターミナル
の終了 ].
Hyper Terminal ends.

When the message “ 現在、接続されています。切断しても
よろしいですか？ ” (The line is connected. Are you sure
you want to disconnect?) appears, select [ はい ].

When using Windows XP, the message ““XXX” と名前付
けされた接続を保存しますか？ ” (Do you want to save
the connection named “XXX”?) appears. You do not
need to save the connection.

When using Windows 2000 Professional, the message
“ セッション XXX を保存しますか？ ” (Do you want to save
session XXX?) appears. You do not need to save the
session.
To reset a host (APN)
Input format
AT+CGDCONT=

(Reset all cid)
AT+CGDCONT=<cid>

(Reset a specific cid only)
To display a current host (APN)
Input format
AT+CGDCONT?

Setting ON/OFF for the Notify Caller ID
The caller ID is important personal information.
Carefully decide whether you want to notify a recipient
of your caller ID.
 The caller ID must be notified when you use “mopera U” or
“mopera”.
1
Perform step 1 to 5 in P.11.
2
Set ON/OFF for the Notify caller ID during packet
communication.
Input format
AT ＊ DGPIR=<n>

1: Add “184” (OFF).
2: Add “186” (ON).
If the AT command you entered is not displayed
Enter “ATE1

”.
When ON/OFF for the Notify caller ID is set, “OK” appears.
■ ON/OFF setting of a dial-up network
You can add 186 (ON)/184 (OFF) to a host number
even for a dial-up network setting (P.12).
When this setting is performed by both
＊ DGPIR
command and dial-up network setting, the following
parameters are used.
Dial-up network setting
(when <cid>=3)
＊ DGPIR command setting
No setting OFF ON
＊ 99 ＊＊＊ 3# ON OFF ON
184 ＊ 99 ＊＊＊ 3# OFF
186 ＊ 99 ＊＊＊ 3# ON
Dial-up Network Setting
When Using Windows XP
1
Click [ スタート ] → [ すべてのプログラム ] → [ アク
セサリ ] → [ 通信 ] → [ 新しい接続ウィザード ].
The new connection window appears.
2
Click [
次へ
].
3
Select [
インターネットに接続する
] and click [
次へ
].
4
Select [
接続を手動でセットアップする
] and click
[ 次へ ].
5
Select [ ダイヤルアップモデムを使用して接続する ]
and click [
次へ
].
6
Put a checkmark in the checkbox of [
モデム
- FOMA
SO903i] and click [ 次へ ].
 The window for selecting the device appears only when
there are several modems.