Foma SO903i, Manual

Page: 41 / 384

38
Before Using the FOMA Terminal
Powering On/Off
<Power on/off>

When you power on the FOMA terminal, the screen for confirming whether to execute the software update may
appear (P.324).
1
Press (PWR) for over two seconds.
ＭＥＮＵ ｉ．ｃｈ
ｉ−ｍｏｄｅ Ｍａｉｌ
The FOMA terminal is powered on, the display and the keypad lights
are turned on, and an animation is displayed. After a while, the stand-by
display appears.

If you have set the PIN1 code setting to [ON], the PIN1 code input screen
appears. Enter the PIN1 code and press (OK) (P.119).
To power off
Press (PWR) for over two seconds.
● If you replace the UIM with another one (except when the Omakase Lock is set), you need to enter a 4- to
8-digit Security code when the FOMA terminal is powered on. When the entered code is correct, the stand-by
display appears. If you enter a wrong Security code five times consecutively, the FOMA terminal is powered
off. (You can still power on the FOMA terminal, however.)
Setting the Basic Functions
<Initial setting>
The Initial setting can be used to make basic settings such as the Date/time and Security
code. See the respective pages for details about the settings.
■
Available setting items
Item Description
Date/time Set the date and time of the FOMA terminal (P.39).
Change code Change the Security code (P.120).
Keypad sound Set the volume of the tone to sound when you press the key (P.102).
Font size Set the size of fonts to be used individually for displaying the Phonebook, Call record,
Mail, i-mode sites, etc. (P.115).
PushTalk caller ID Set whether to send the FOMA terminal’s phone number when you originate a PushTalk
call (P.83).
Location request Set whether to provide positioning information (P.214).
1
From the Menu, select [Settings] → [Management] → [Init. setting] and press .
Ｄａｔｅ／ｔｉｍｅ
Ｃｈａｎｇｅ ｃｏｄｅ Ｙｅｔ
Ｋｅｙｐａｄ ｓｏｕｎｄ １
Ｆｏｎｔ ｓｉｚｅ
ＰｕｓｈＴａｌｋ ｃａｌｌｅｒ ＩＤ
ＯＦＦ
Ｌｏｃａｔｉｏｎ ｒｅｑｕｅｓｔ
Ｙｅｔ
Ｉｎｉｔｉａｌ ｓｅｔｔｉｎｇ
2
Set each item.