Foma SO903i, Manual

Page: 236 / 384

233
Displaying/Editing/Managing Data
Using the FOMA Terminal with
a PC
<Memory mode>
When you connect the FOMA terminal to a PC using
the FOMA USB connection cable (optional), you can
use it as an external drive to read/write data on the
External Memory/SubMemory.

The operating environment for using the FOMA terminal
connected to a PC is as follows.
Item Required environment
C o n n e c t i o n
cable FOMA USB connection cable (optional)
PC main unit P C w i t h a U S B p o r t ( U n i v e r s a l S e r i a l B u s
Specification 1.1 compliant) that can be used to
connect the FOMA USB connection cable (optional)
OS Windows 2000 Professional (SP3 or later),
Windows XP (Japanese version)
1
Connect the FOMA terminal and PC using the
FOMA USB connection cable (optional).
1
2
3
USB connector
E x t e r n a l
connection
terminal
Inser t the
connector
horizontally
w i t h t h e
label side
facing up.
External
connection
connector
FOMA USB
connection
cable USB terminal
The notification icon “ ” (USB cable
cncted) appears in the stand-by
display.
2
Press (Link) in the stand-by display, select [ ],
and press .
Ｃｏｍｍｕｎｉｃａｔｉｏｎ ｍｏｄｅ
Ｍｅｍｏｒｙ ｍｏｄｅ
ＵＳＢ ｍｏｄｅ ｓｅｔｔｉｎｇ
[Communication mode]:
Perform packet and 64K data
c o m m u n i c a t i o n , a n d s e n d /
receive data.
[Memory mode]:
Read and write data from/to the
External Memory/SubMemory.
3
Select [Memory mode] and press .
The Memory mode is set and “ ” changes to “ ”.
On the PC, “SO903i” and “
リムーバブルディスク ” are
displayed for the SubMemory and External Memory
respectively.
● If the FOMA terminal is not connected to a PC correctly or
the battery level is very low or 0, not only data cannot be
sent/received, but also it may be lost in some cases.
● Do not unplug the FOMA USB connection cable (optional)
during reading/writing data. If you do so, not only data cannot
be sent/received, but also it may be lost in some cases.
● Do not format the External Memory/SubMemory using a
PC, etc. Make sure to format it on the FOMA terminal.
● During the Memory mode, both the “Memory Stick Duo”
and miniSD memory card are displayed on a PC. However,
only one of these memories can be inserted in the FOMA
terminal at a time.
Terminating the Memory Mode
To remove the FOMA terminal from a PC, perform the
procedure to safely remove the hardware on the PC in
advance, which is slightly different for each OS.
Example: When using Windows 2000 Professional or Windows XP
1
Double-click the task tray icon [ ]
（ハードウェア
の安全な取り外し） on the Windows desktop.
2
Move the pointer to [USB 大容量記憶装置デバイス ]
and click [ 停止 ].
3
Click [OK] and confir m that the hardware is
unmounted successfully.
4
Press (Quit) in the Memory mode display of the
FOMA terminal.
Ｃｏｎｎｅｃｔｉｎｇ
Ｄｏ ｎｏｔ ｕｎｐｌｕｇ
ＵＳＢ ｃａｂｌｅ
Ｍｅｍｏｒｙ ｍｏｄｅ
The screen for confirming whether
t o c a n c e l t h e M e m o r y m o d e
appears.
5
Select [Yes] and press .
The Memory mode is terminated.