Foma SO903i, Manual

Page: 79 / 384

76
PushTalk
Originating a PushTalk Call

You cannot originate a PushTalk call during a voice call, a videophone call, or data communication.

If you originate a PushTalk call during i-mode communication, the i-mode communication is terminated.
Originating a PushTalk call while running i- α ppli also stops the i- α ppli.
1
Enter a phone number in the stand-by display.
2
Press .
Ｍｙｓｅｌｆ
０９０ＸＸＸＸＸＸＸＸ Ｃｏｎｎｅｃｔｅｄ
Ｏｎ ＰｕｓｈＴａｌｋ
Ｄｉａｌｉｎｇ ＰｕｓｈＴａｌｋ
０９０ＸＸＸＸＸＸＸＸ
When a PushTalk call is originated, the signal tone sounds.
When the call is answered, it is switched to the hands-free operation
that allows you to hear the recipient’s voice from the speaker.
To speak
Press while the floor is open. You can speak while you press
and hold .
3
Press to end the communication.
● You cannot use PushTalk to place a call to emergency numbers (110, 119, and 118).
Originating a PushTalk Call from the Call Record
You can originate a PushTalk call using the Redial and Received records.
Example: Originating a PushTalk call from the Received record
1
Press ( ) in the stand-by display.
The Received record display appears.
2
Select a received record and press .
When a PushTalk call is originated, the signal tone sounds.
● If a member other than the caller is disconnected during PushTalk communication among several persons,
the disconnected member can come back to the session using the Received record as long as the other
members continue it.