Foma SO903i, Manual

Page: 75 / 384

72
Voice/Videophone Call
Setting How to Answer a Videophone Call during i-mode
Default Prefer V.phone
You can set how to answer a videophone call received during i-mode or packet
communication, for example, sending or receiving mail.
1
From the Menu, select [Settings] → [Call] → [Videophone] → [V.ph while packet]
and press .
[Prefer V.phone] : Receive a videophone call. When you answer the videophone call, the packet
communication in progress is disconnected.
[Prefer packet] : Continue the packet communication without receiving a videophone call. The received
call is saved in the Received record.
[V.ph voicemail] : Connect a received videophone call to the Voice Mail Service Center.
[Call forwarding] : Connect a received videophone call to a forwarding phone number.
2
Select the operation to be performed when you receive a videophone call during
i-mode communication and press .
The V.ph while packet is set.
Setting Notice for Switching between Voice and Videophone Calls
<Videophone switch notice>
You can set whether to notify the recipient/caller that the FOMA terminal is capable of
switching between voice and videophone calls.

You cannot perform this setting when you are outside of the service area or in a place where radio waves do not
reach, or during a voice or videophone call.
1
From the Menu, select [NW Services] → [V.ph switch notice] and press .
Ｉｎｄｉｃａｔｉｏｎ ＯＮ
Ｉｎｄｉｃａｔｉｏｎ ＯＦＦ
Ｃｈｅｃｋ ｓｅｔｔｉｎｇ
Ｖ．ｐｈ ｓｗｉｔｃｈ ｎｏｔｉｃｅ
2
Select [Indication ON] → [Yes] and press .
When you do not want to notify
Select [Indication OFF] → [Yes].
To check the setting
Select [Check setting].