Foma SO903i, Manual

Page: 47 / 384

44
Voice/Videophone Call
What is Videophone?
You can use the videophone function between DoCoMo videophone compatible
terminals. You can use videophone to talk to the recipient/caller while looking at each
other’s image. You can send a still image, substitute image, or Chara-den character
instead of your own.
DoCoMo’s videophone complies with “3G-324M
※ 1
standardized by 3GPP
※ 2
for global
standard”. The FOMA terminal cannot be connected to a videophone that uses a
different system.
※ 1 3G-324M
Global standard for third-generation mobile videophones.
※ 2 3GPP (3rd Generation Partnership Project)
Local standardization committee set up for development of common technology specifications related to
third-generation mobile wireless communication systems (IMT-2000).
Using the Display during a Videophone Call



  




Videophone call communication
speed
: 64kbps : 32kbps

Videophone image (Large)
Display an image of a person you
are talking to (default setting).

Videophone image (Small)
Display your image (default
setting).

Call duration
Display the call duration in the
hh:mm:ss format.

Outgoing image status
: Camera image is being
sent.
: A still image is being sent.
: A Chara-den character is
being sent.

Zoom magnification
Display the zoom magnification
bar.

: Hands-free ON

: Photo light ON

Mode
: Mode for operating full-
body actions
: Mode for operating parts
actions
: Mode for sending touch-
tones (DTMF)
Operations during a Videophone Call
Operation Key operation
Switch between camera image/
substitute image Press (MySide/Sub). Every time you press the key, the display is
switched between camera image/substitute image.
Switch cameras Press (In/Out). Every time you press the key, the camera is switched
between the In-/Out-camera.
Switch ON/OFF of the hands-free operation Press ( ). Every time you press the key, the ON/OFF setting is switched.
Zoom-in/-out image Press (Zoom in) / (Zoom out) when recording with the Out-camera.
Put a call on hold From the Function menu, select [Holding]. To cancel this function, press .
Switch the display From the Function menu, select [Display setting].
Switch the quality of the outgoing
image From the Function menu, select [Visual preference]. When you finish a call, the
image quality set for the Visual preference of the Videophone setting is restored.
Select a substitute image From the Function menu, select [Select sub image].
Switch ON/OFF of the photo light From the Function menu, select [Photo light] (when using the Out-camera only).
Display your phone number From the Function menu, select [Own number].
Switch to a voice call From the Function menu, select [Chg. to voice call] (when placing a videophone call only).