Foma SO903i, Manual

Page: 218 / 384

215
GPS Function
2
Enter the Security code and press .
The Location request display appears.
[ON]:
Provide the location information to requesting party. The
location information may be sent to a searcher without
operating the FOMA terminal.
[OFF]:
Do not provide location information to requesting party.
3
Select [ON]/[OFF] and press .
The Location request is set. If you set [ON], “ ” appears.
To perform the setting via the Initial setting
From the Menu, select [Settings] → [Management] →
[Init. setting] → [Location request], enter the Security
code, and select [Yes]/[No].
Setting the User-defined Host
Default Initial host
※ Normally, you do not need to change this setting.
You can set one host for using the GPS service besides
the Initial host set at the time of subscription.
1
From the Menu, select [LifeKit] → [GPS] → [Notify/
Provide menu] → [Loc. request menu] → [Host
setting] and press .
Ｉｎｉｔｉａｌ ｈｏｓｔ
Ｕｎｒｅｇｉｓｔｅｒｅｄ
Ｈｏｓｔ ｓｅｔｔｉｎｇ
To edit the set host
Move the cursor to the set host, press (Edit), and
enter the Security code. Edit each item.
To delete the set host
Move the cursor to the set host, press (Delete), enter
the Security code, and select [Yes].
To reset the host to the default setting
Select [Initial host].
2
Select [Unregistered] and press (Edit).
The Security code screen appears.
3
Enter the Security code and press (OK).
Ｈｏｓｔ ｎａｍｅ
Ｈｏｓｔ ａｄｄｒｅｓｓ
Ｒｅｇｉｓｔｅｒ ｈｏｓｔ
[Host name]:
Enter a host name within 99 half-width alphanumeric
characters and symbols.
[Host address]:
Enter a host address within 100 half-width alphanumeric
characters and symbols.
4
Enter each item.
5
Press (Complete).
The entered host is saved.
6
Select a host and press .
The user-defined host is changed.
Performing Settings for Using the GPS
Service
You can connect to the GPS service settings site and
perform setting necessary for providing the location
information.
1
From the Menu, select [LifeKit] → [GPS] → [Notify/
Provide menu] → [Loc. request menu] → [Service
settings] and press .
The FOMA terminal is connected to the GPS service
settings site.
2
Set each item.
 For details about how to set the services, contact your
service provider.
● While you are connecting to the GPS service settings site,
available Function menus are different from the ones displayed
during i-mode. The URL history is also not recorded.
● If you connect to the GPS service settings site during
international roaming, an error message appears on the
display and a communication charge is required.
Notifying Your Current Location
Information
<Location notice>
You can notify a specific party (a service provider that
supports the Location notice function) of the location
information of your current location.

To use the Location notice, you may need to subscribe to a
service provider that supports this function. There may be a
charge for the use of the service.
 To use the Location notice, follow the instructions provided by
the service provider or on the DoCoMo’s website. There is a
charge for the use of the Location notice function.
1
From the Menu, select [LifeKit] → [GPS] → [Notify/
Provide menu] → [Location notice] and press .
The Loc. service client display appears.
2
Select a party to be notified and press .
○○サービス
Ａｃｃｕｒａｃｙ：★☆☆
Ｐｏｓｉｔｉｏｎｉｎｇ
ｙｏｕｒ ｌｏｃａｔｉｏｎ．
Ｐｒｅｓｓ ｃｌｅａｒ ｋｅｙ
ｔｏ ｃａｎｃｅｌ
Ｎｏｔｉｆｙｉｎｇ ｌｏｃａｔｉｏｎ
“ ” f l a s h e s a n d t h e i n c o m i n g
indicator flashes.
W h e n t h e c u r r e n t l o c a t i o n i s
notified, the location notice tone
sounds and the location information
is notified to a recipient.
To enter a party to be notified and
notify location information
Select [Direct input], enter the
service client ID, and press
(OK).
To quit the Location notice
Press (Cancel).
● The location information may be sent depending on the
timing of cancellation.
● Even if the location information may have been sent, the
service provider that supports the Location notice function
may not have received it depending on the radio wave
condition.
Continued