Foma SO903i, Manual

Page: 104 / 384

101
Sound/Display/Light Settings
4
Set the volume of the ring tone at [Ring volume].
Select from [OFF] and [1 to 5].

For an incoming voice, videophone, or PushTalk call, you can set [Step down] and [Step up]. [Step
down] turns down the volume every six seconds and [Step up] turns up the volume every six seconds.
To set the ring tone volume to [OFF]
Press at level 1. When you set the ring tone volume for incoming calls, incoming mail, or
both incoming calls and mail to [OFF], “ ”, “ ”, or “ ” appears in the stand-by display
respectively.
5
Select an image from the Data Box at [Receiving img].
 You can set the following files.
Call/Videophone
Category File format File size Image size
My picture GIF/JPEG Max. 500K bytes Max. [VGA(640 × 480)]
Flash Max. 100K bytes −
i-motion
※ −
Max. 2M bytes [sQCIF(128
×
96)]/[QCIF(176
×
144)]
Mail/MessageR/MessageF
Category File format File size Image size
My picture GIF/JPEG Max. 100K bytes Max. [QVGA(240 × 320)]
Flash Max. 100K bytes −
※ Some i-motion may not be set.
To check the incoming image
Move the cursor to the incoming image and press (Play).
6
Set a vibration pattern at [Vibrator].
Ｐａｔｔｅｒｎ１
Ｐａｔｔｅｒｎ２
Ｌｉｎｋ ｍｅｌｏｄｙ
ＯＦＦ
Ｓｅｌｅｃｔ ｖｉｂｒａｔｏｒ
[Pattern1] : Set a short intermittent vibration.
[Pattern2] : Set a long intermittent vibration.
[Link melody] : Set vibration to be synchronized with the vibration pattern of the
melody. When you set the ring tone to [Silent] or the melody is not
specified with a vibration pattern, [Pattern1] is used.
[OFF] : Do not set the vibrator.
When you set the vibrator for incoming calls, incoming mail, or both
incoming calls and mail, “
”, “ ”, or “ ” appears in the stand-by
display respectively.
To check the vibration
Move the cursor to the vibration pattern and press (Confirm).
7
Select an indicator color at [Color].
Select from 12 colors plus [C13:ALL] (in which the 12 colors flash in turn).
When you move the cursor through the colors, the incoming indicator flashes accordingly.
8
Enter the duration for sounding the ring tone at [Ring time].
Enter the duration within the range from 00 to 30 seconds.

You can set the ring time for incoming mail, Message R, and Message F.
Continued