![background image](http://html1.mh-extra.com/html/flow/mach-300/mach-300_manual_2307753113.webp)
Best practices when using DCF
Best practices include:
• Set user home 1–2 inches above the highest point of the material surface. This allows enough
clearance for rapid traverses.
• Keep the DCF bellows above the water level. If there are unidentified leaks, this keeps more
water from getting in.
• After you install the DCF, the footprint around the cutting head increases. Use fixtures to hold
your material, but make sure there's enough space between the fixtures and DCF.
• Firmly clamp the material if you are using contour following. Edge quality decreases when
motion in the slats or water surges in the tank cause the material to shift.
• Spray the material surface with clean water occasionally to eliminate abrasive and reduce the
chance of setting an incorrect standoff.
© 2021 Flow International Corp.
Retrieved from Flow KB on April 14, 2021 PST
Ancillary option: Dynamic Contour Follower
Summary of Contents for MACH 300
Page 1: ...MACH 300 SYSTEM MANUAL Includes Ancillary Options M 810 REV C en APRIL 2021...
Page 28: ...View 2 2021 Flow International Corp Retrieved from Flow KB on April 12 2021 PST Safety...
Page 29: ...View 3 2021 Flow International Corp Retrieved from Flow KB on April 12 2021 PST Safety...
Page 107: ...ANCILLARY OPTIONS For Mach 300...