To enable the pendant
To enable the pendant, do the following:
1. In FlowCUT, select
Run Machine
, and then select
Click to turn on handheld
operator panel
.
2. Press and hold both enabling buttons on the pendant
—
the pendant is now enabled and
corresponding functionality on the keyboard is disabled.
To disable the pendant
To disable the pendant, do the following:
1. Release both enabling buttons on the pendant.
2. In FlowCUT, select
Click to turn off handheld operator panel
—
the pendant is
now disabled and corresponding functionality on the keyboard is enabled.
© 2021 Flow International Corp.
Retrieved from Flow KB on April 14, 2021 PST
Ancillary option: Remote pendant
Summary of Contents for MACH 300
Page 1: ...MACH 300 SYSTEM MANUAL Includes Ancillary Options M 810 REV C en APRIL 2021...
Page 28: ...View 2 2021 Flow International Corp Retrieved from Flow KB on April 12 2021 PST Safety...
Page 29: ...View 3 2021 Flow International Corp Retrieved from Flow KB on April 12 2021 PST Safety...
Page 107: ...ANCILLARY OPTIONS For Mach 300...