Display panel buttons
Button
To
Do this
View the software version, operating hours
(h), and switching cycles (c).
Press and hold the
P1
button for five
seconds.
Release pressure from the vessel.
Press the
P2
button.
Set the cycle counter to zero.
Press and hold the
P3
button for five
seconds.
Switch the potential free contacts for a
warning message from N/O to N/C. You can
accept the selected signal in the ADS and use
it there for an additional alarm or as a way to
stop the cutting process.
Press and hold the
P4
button for 10
seconds.
ALT
No functionality.
—
DEL
No functionality.
—
ESC
No functionality.
—
OK
Functional from the "Running" screen only.
Password
: Functionality disabled.
Stop/Run
: A check mark show what
state the unit is in. Press the OK button
to toggle between states. When you
switch from Run=>Stop, the pressure
vessel depressurizes.
Password
: Appears twice in menu, but
functionality is disabled.
Info
: Displays information about the
PLC from the manufacturer.
Set clock
: Sets the correct time and
date for the PLC; however, this is
unnecessary for operation as the unit
counts relative time from a "zero" point.
© 2021 Flow International Corp.
Retrieved from Flow KB on April 14, 2021 PST
Ancillary option: PASER CF900 Abrasive Delivery System
Summary of Contents for MACH 300
Page 1: ...MACH 300 SYSTEM MANUAL Includes Ancillary Options M 810 REV C en APRIL 2021...
Page 28: ...View 2 2021 Flow International Corp Retrieved from Flow KB on April 12 2021 PST Safety...
Page 29: ...View 3 2021 Flow International Corp Retrieved from Flow KB on April 12 2021 PST Safety...
Page 107: ...ANCILLARY OPTIONS For Mach 300...