Enabling buttons
To use the pendant, you must push and hold the enabling buttons during use. Otherwise, the pendant
will not work as intended.
E-stop button
Push the E-stop button in an emergency or when directed to in user instructions. This will disable the
drives, the high-pressure water stream, the abrasive, and the pump. When you are ready to do a reset,
release the E-stop.
Incremental motion control wheel
Moves the selected axis at an incremental jog, based on the selected jog rate.
• To move the axis in a positive direction, turn the control wheel clockwise.
• To move the axis in a negative direction, turn the control wheel counterclockwise.
Jog rate selector
Selects the jog rate (rate of motion) for the incremental motion control wheel and the continuous jog
buttons. Choose between LOW, HIGH, and RAPID.
LOW = 1 micron (0.0001 in.)
HIGH = 10 microns (0.001 in.)
RAPID = 100 microns (0.01 in.)
© 2021 Flow International Corp.
Retrieved from Flow KB on April 14, 2021 PST
Ancillary option: Remote pendant
Summary of Contents for MACH 300
Page 1: ...MACH 300 SYSTEM MANUAL Includes Ancillary Options M 810 REV C en APRIL 2021...
Page 28: ...View 2 2021 Flow International Corp Retrieved from Flow KB on April 12 2021 PST Safety...
Page 29: ...View 3 2021 Flow International Corp Retrieved from Flow KB on April 12 2021 PST Safety...
Page 107: ...ANCILLARY OPTIONS For Mach 300...