Lockout/Tagout (LOTO)
Only trained personnel can do Lockout/Tagout. These instructions are supplemental to your facility
Lockout/Tagout procedures. We recommend your safety personnel approve all Lockout/Tagout
instructions for anyone who works around high-pressure waterjet equipment.
To do a Lockout/Tagout, do the following:
1. Jog the cutting head to a loading or safe position.
2. Close all programs, and then press the E-stop.
3. Select
Start
>
Shut down
to turn off the machine PC.
4. Wait until the machine PC is completely shut down, and then turn off the main power to the
machine (pump and machine disconnect).
5. Lock the interface enclosure, and then put an appropriate tag on the enclosure.
(Picture shown for general reference only and may vary from your machine model.)
6. Turn off the air and water supply.
© 2021 Flow International Corp.
Retrieved from Flow KB on April 12, 2021 PST
Safety
Summary of Contents for MACH 300
Page 1: ...MACH 300 SYSTEM MANUAL Includes Ancillary Options M 810 REV C en APRIL 2021...
Page 28: ...View 2 2021 Flow International Corp Retrieved from Flow KB on April 12 2021 PST Safety...
Page 29: ...View 3 2021 Flow International Corp Retrieved from Flow KB on April 12 2021 PST Safety...
Page 107: ...ANCILLARY OPTIONS For Mach 300...