Fagor CNC 8070, Operating Manual

Page: 284 / 358

‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡
Operation manual
8070 CNC
11.
PLC
"M
essa
ges"
ser
v
ic
e
(S
OFT
V03.0
X
)
250
11.13.2 Editing the message and error table
Messages
To add a new message to the table, press the "New message" softkey. The CNC adds
a new row to the table and it identifies it with the label -MSG-, indicating that it
corresponds to a message.
To edit or modify the table data, use the cursor to select the cell whose value is to
be changed and define the data as follows:
• The number and text of the message is entered directly from the keyboard.
• The "show" option is turned on and off with the [SPACE] key.
• The file for additional information may be entered directly or may be selected with
the "Select Info" softkey.
Press [ENTER] every time a data is edited to accept the new value or [ESC] to cancel
it.
To delete a message from the table, select it with the cursor and press the "Delete"
softkey.
Errors
To add a new error to the table, press the "New error" softkey. The CNC adds a new
row to the table and it identifies it with the label -ERR-, indicating that it corresponds
to an error.
To edit or modify the table data, use the cursor to select the cell whose value is to
be changed and define the data as follows:
• The number and text of the error are entered directly from the keyboard.
• The "show" option and the file for additional information cannot be edited.
Press [ENTER] every time a data is edited to accept the new value or [ESC] to cancel
it.
To delete an error from the table, select it with the cursor and press the "Delete"
softkey.
Keys for defining the data of the logic analyzer
To move the cursor to the upper, lower, left or right cell.
To move the cursor to the beginning / end of the row.
To move the cursor to the beginning/end of the column.