Fagor CNC 8070, Operating Manual

Page: 177 / 358

‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡
Operating manual
CNC 8070
EDI
T
IN
G-
SI
MULATI
ON MODE
Pr
of
ile
edi
to
r
6.
(S
OFT
V03.0
X
)
143
6.9.7 Modify a profile and insert corners
To modify the defined profiles by either modifying or deleting the existing elements
or inserting new elements. Likewise, it is possible to insert rounding, chamfers and
tangential entries or exits.
When selecting this option, the softkey menu will show the necessary options to
modify the profile.
‡
Modify element
It is possible to modify any data of a section of the profile.
Once the desired element has been selected, one may modify the type of section
(straight or arc) or its data. Once the element has been modified, press "Validate"
to confirm the changes.
The CNC recalculates the new profile according to the data used to define that
section and the next one (tangency, angle, etc.)
‡
Insert element
To insert a new element in any position of the profile.
After selecting the section after which the element is to be inserted, select the type
of section (straight or arc) to be inserted, define its parameters and press the
"Validate" softkey.
The CNC recalculates the new profile according to the data used to define that
section and the next one (tangency, angle, etc.)
‡
Delete element
To delete an element of the selected profile.
Once the element to be deleted has been selected, confirm the command by
pressing [ENTER].
The CNC recalculates the new profile.
‡
Corners
To include rounding, chamfers, tangential entries or exits in the defined profile.
See
"Corner definition" on page 144.
‡
Additional ISO
For adding an ISO coded line to a previously closed profile.
Once the ISO coded line to be added has been entered, confirm the command
by pressing the [ENTER] key.