Fagor CNC 8070, Operating Manual

Page: 332 / 358

‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡
Operating manual
CNC 8070
14.
DDSSETUP
Ap
pear
ance of
t
he DDSSet
up m
o
de
(S
OFT
V03.0
X
)
298
14.1 Appearance of the DDSSetup mode
When this operating mode is active, it will be indicated at the top right side of the
general status bar.
The active services are switched in a rotary manner, in such a way that when pressing
on the last active service, it shows the first one.
This operating mode consists of several services. As these services are being
activated, they overlap each other. If several services active, it is possible to switch
from one to another using the relevant key, if it has been set accordingly.