Fagor CNC 8070, Operating Manual

Page: 244 / 358

‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡
Operating manual
CNC 8070
10.
UTI
L
IT
IES MODE
U
ti
lit
ie
s (
S
of
tk
eys)
(S
OFT
V03.0
X
)
210
10.2 Utilities (Softkeys)
10.2.1 Sorted by
It is used to order the list of files.
The file list may be ordered alphabetically, by size, by data or by type. When pressing
the same ordering criteria twice, the CNC toggles from ascending to descending and
vice versa.
The softkey menu shows the ordering criteria currently selected (the softkey will
appear pressed).
10.2.2 Options
It is used to personalize how the program listing will be displayed on the screen.
Update
It updates the list of files showing the files of the folder currently selected. Only when
the "auto-update" option is not active.
Auto-update
When this option is selected (the softkey will appear pressed), every time a folder is
selected, the CNC will automatically update the list of files.
Column adjust
When this option is selected (the softkey will appear pressed), the columns of the file
lists will adjust to the text they contain so as to show the text that may be truncated
because it is too long.
Reset all
It closes the folder tree (layout) and it only shows the devices (floppy disk, Ethernet
network, etc. ) connected to the CNC.
Show hidden files
When this option is selected (the softkey will appear pressed), the file list shows all
the files of the selected folder even those having the "hidden" attributes. Otherwise,
these files will not be shown.
When selecting this option, the softkey menu shows the different ordering options.
To return to the previous menu, press the key for the previous menu.
When selecting this option, the softkey menu shows the following personalizing
options. To return to the previous menu, press the key for the previous menu.