Fagor CNC 8070, Operating Manual

Page: 135 / 358

‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡
Operating manual
CNC 8070
EDI
T
IN
G-
SI
MULATI
ON MODE
Edi
ti
ng wi
n
dow
6.
(S
OFT
V03.0
X
)
101
6.2.3 Syntax errors when editing
The syntax errors occurred while editing or after running a syntax check will be
displayed at the bottom of editing window.
To toggle the cursor between the editor and the error listing, press the key
combination [CTRL]+[TAB].
Errors while editing
While editing, each block is analyzed when entered. If a syntax error is detected in
the block, the error window will display the following information:
• Position of the error in the block.
• Error number and explanatory text.
Errors after a syntax check
• Location and name of the program being checked.
• Line number and position of the error within the block.
• Explanation of the error.
Moving the cursor through the errors of the window, the editor will highlight the block
containing the selected error. Press [ENTER] to select the block containing the error
or press [ESC] to close the error window.
The syntax check is executed from the icon menu.
The syntax check checks all the blocks of the program. If a syntax error is detected,
the error window will show the following information.