Fagor CNC 8070, Operating Manual

Page: 343 / 358

‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡
Operating manual
CNC 8070
DDSSETUP
–I
nf
o
rm
a
ti
o
n– ser
v
ic
e
14.
(S
OFT
V03.0
X
)
309
14.8 –Information– service
The command bar is located at the bottom of the window. See "14.3 Command bar"
on page 302.
Monitoring the status of the operations of the drive
The
OPERATION STATUS
softkey of the horizontal menu gives access to this option.
This screen monitors the status of the operation being carried out at the drive. The
drive whose operations are to be monitored is selected at the top of the window.
There is a led for each operation and it shows the status of the operation at the drive.
Green led Operation active.
Black led Operation inactive.
Monitoring the status of the operations of the drive
The
DIGITAL I/O
softkey of the horizontal menu gives access to this option.
This screen monitors the status of the digital inputs and outputs of the drive. The drive
whose digital I/O's are to be monitored is selected at the top of the window.
There is a led for each digital input and output of the drive and it shows its status.
Green led Input or output active.
Black led Input or output inactive.
This service monitors two types of information. It shows the status of the operation
being carried out at the drive, on the other hand it shows the status of the digital inputs
and outputs of the drive.