Fagor CNC 8070, Operating Manual

Page: 201 / 358

‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡
Operating manual
CNC 8070
USER TABLES
Ar
it
hm
et
ic
par
am
et
er
t
a
bl
e
s
8.
(S
OFT
V03.0
X
)
167
8.4 Arithmetic parameter tables
There are the following arithmetic parameter tables:
• Common parameters.
• Global parameters.
There is a table for each channel.
• Local parameters.
There are seven tables for each channel, one table per nesting level (7 levels).
The CNC generates a new nesting level for local parameters every time parameters
are assigned to a subroutine.
A. Parameter list.
B. Parameter value.
The end of this chapter describes how to edit these tables.
Arithmetic parameters
The OEM defines the range of local and global parameters up to a maximum of 100
local parameters (P0-P99) and 9900 global parameters (P100-P9999).
When the local parameters are used in a subroutine calling block, they can also be
referred to by the letters A-Z (except "Ñ") in such a way that "A" is the same as P0
and "Z" is the same as P25. That is why the local parameter tables show the parameter
number next to their associated letter.
The parameter values may be set directly in the table or from the PLC or via part-
program. In this case, the table values are updated after carrying out the operations
indicated in the block being executed.
The parameter values may be displayed either in decimal notation (6475.873) or
scientific (0.654E-3).
A B