Fagor CNC 8070, Operating Manual

Page: 196 / 358

‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡
Operating manual
CNC 8070
8.
USER TABLES
Appear
anc
e of
t
h
e
t
abl
e
m
o
de
(S
OFT
V03.0
X
)
162
8.1 Appearance of the table mode
This operating mode consists of several tables. The various tables may be selected
using the horizontal softkeys.
Some tables are common to all the channels and others belong to each channel. In
this case, by default, they show the ones of the active channel; but it is possible to
access those of any other channel from the vertical softkey menu.
The zero offset tables and fixture offset tables are common to all the channels;
however, in each channel they show the axes of that channel. When applying an offset
in a channel, it is only applied to the axes that are part of the channel at the time.
The tables available are:
• Zero offset table.
• Fixture table.
• Table of global parameters. There is a table for each channel.
• Table of local parameters. There are seven tables for each channel, one table per
level.
• Table of common parameters. The table is common to all the channels.
Standard configuration
The standard configuration of this work mode, described in this manual corresponds
to the one supplied by Fagor. In some cases, the manual shows a sample screen,
instead of that of the CNC in order to make it easier to understand.