Fagor CNC 8070, Operating Manual

Page: 226 / 358

‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡
Operating manual
CNC 8070
9.
TOOL
AND MAGA
Z
INE TABLE
Tab
le f
o
r t
he
s
ta
tus
of
t
he t
ool
c
hange pr
oces
s
(S
OFT
V03.0
X
)
192
9.5 Table for the status of the tool change process
This screen monitors the tool changes being executed in each channel.
It indicates the following for each tool change process:
• The type of change selected and the magazine involved.
The type of change refers to the type of operation being carried out or to be carried
out when executing function M06. The possible types of change are load a tool
into the spindle or load and unload a ground tool from the magazine through the
spindle.
• The "execution " LED informs that the tool change process is running and that
the magazine is carrying out an operation.
• The "status" LED informs on whether the magazine is in an error state or not. To
eliminate the error condition, press the reset softkey in the magazine table.